Used Foam Trailers
Custom Trailers
Spray Rig Trailers
Used Spray Equipment
Plain Used Trucks Boss Spray Machine
Generators
Refrigeration Dryer
Spray
Foam Equipment
Discounted
Equipment
Spray
Foam Accessories
Fireproof
Paint for Foam
Why
use Foam?
Order
Forms
Financial Services
Financing Package
Marketing
Items
Manufacturing
Plant
|
SFE-A-30 “ BOSS” Spray Foam Machine

(CLICK TO ENLARGE PICTURES)
"The SFE-A-30 foam machine is air driven, meaning that the drive
system is a 5" air motor. "It features a 1:1 ratio proportioner so it pumps equal
pressure and volume to the 'A' and 'B' sides. "The fluid sections (Pressure
Cylinders) are a very simple High volume / High flow design.
"The SFE-A-30 electrical system is 240v, single phase and the
electrical wiring to all internal systems is simple and straight forward. The entire
electrical system is of a simple breaker and relay design which gives the user a
machine that is easy to work on if need be. "There are no boards to go bad and
no sensitive electrical devices to malfunction.
"The optimal amount of air for SFE-A-30 is 25 cfm at 100psi and at
least 20 cfm at 100 psi is required to operate. This can easily be acquired with a
gas air compressor with 11-13 hp. This unit is good for spraying up to 2000 psi.
_____________________HP Machine____________________
"The Extremely High Efficiency Pre-heaters are 6,000 watts per
side for a total of 12,000 watts. "If higher pressure is required, the 6" air motor
can be used on this same machine. The 6" air motor will make the machine
require 35 cfm of air to run. "All parts for the SFE-A-30 are in stock at Spray Foam Equipment and the unit
itself comes with a 1 year warranty against defective materials. It is a case of
built simple, built tough and built in the U.S.A. It saves on the original outlay
and on expensive service of unnecessary computer components just to make a
series of lights flash in sequence. Quite simply, it's about saving money better
spent staying afloat in this uncertain economy.
|
|
|
 |
|
|
|
|